How to Check Car Oil

The oil in your car is the lifeblood that keeps it going around New Rochelle without issue. Making sure you have the right amount can help keep all of your engine’s internal parts working well. 

At Victory Mitsubishi, we have the Victory Mitsubishi Service Center geared towards everything your car may need. To this day, some of the more common questions we’ve received are “How to check oil levels in cars?” and incidentally, “How to check car oil?” Find out everything related to these questions and more with our guide below.

Learn How to Check the Oil Level in Your Car

So how to check the oil level in your Mitsubishi car? At the Victory Mitsubishi Service Center, we’ve encountered a variety of new and pre-owned vehicles over the years. Some newer vehicles feature electronic oil monitors that don’t use dipsticks. As a result, begin by checking your owner’s manual for the recommendations for existing oil levels. Follow these steps:

1. Make sure your vehicle is parked at ground level and your engine is turned off.
2. Open the car’s hood and find your dipstick.
3. Pull your dipstick out of the engine and wipe any oil from the end of it.
4. Reinsert your dipstick all the way back into its tube, then pull it out and look at both sides to see what level your oil is at. (Each dipstick should have varying levels marking key oil metrics for your engine).

If the oil is too low on the dipstick, i.e. outside its recommended oil level, it’s best you add more oil ASAP. After you fill up with some oil, put your dipstick back into the tube and wait 15 seconds. Then pull it out and see if you’ve reached the proper level.

How to Reset Oil Change Light in Bronx

Beyond how to check car oil, all Mitsubishi vehicles have a specific process for resetting your oil change light. Only remember to do this if you’ve actually done an oil change. Missing oil change appointments can affect your car in the long term.

How to Reset Oil Change Light Step-by-Step:

• Turn all your car’s systems off, yet leave the engine running.
• Find your “Reset” button or stick on the dashboard (Typically near the Speedometer or Fuel Gauge).
• Hold the button down until your oil change light begins to flash (Signs of resetting may differ per vehicle).
• Turn off your ignition, wait a few seconds and then turn your car back on.

By this point, your oil light should be reset. If you have any questions about this, contact our service team at 347-708-8392 or online.

Let the Victory Mitsubishi Service Team Keep Your Car in Prime Condition

Beyond how to check your car oil, Victory Mitsubishi is geared towards getting Mount Vernon and New Rochelle back on the road as quickly as possible. Check out our service specials and save money on your next visit. If you think it’s about time to get a new Mitsubishi and you want to trade your car in, we can help you with that too. Keep your car up and running with Victory Mitsubishi. See you shortly!